Effects of urea transportation systems on its physical and field application quality

Main Article Content

Santiago Néstor Tourn
Víctor Merani,
Matilde Mur
Pedro Platz
Facundo Guillino
Juan Manuel Vázquez
Luciano Larrieu
Laura Giambelluca
Roberto Balbuena

Abstract

Agricultural production depends largely on the use of fertilizers. These are generally broadcast in solid form and their transport can affect its physical quality and therefore, its application, affecting use efficiency and crop yield. The purpose of this research was to evaluate the effect of two ways of transporting the fertilizer, screw and belt conveyor, on both the physical quality of the fertilizer and its application in the field. It was hypothesized that the screw conveyor system would affect the physical quality of urea and, consequently, its field application quality, in comparison to the belt conveyor. The work was carried out in September 2020, using urea fertilizer and two transport systems, a traditional screw conveyor and a belt conveyor. Fertilizer samples were taken before and after passing through the transport systems and the apparent density, granule size and hardness were evaluated. The transported fertilizer was applied with a double disc fertilizer and its field distribution evenness was evaluated. The screw transport system caused a decrease in bulk density and hardness of the fertilizer, resulting in a higher amount of fine particles (<2mm), which in turn affected its distribution in the field. Thus, compared to the belt conveyor, the screw transport system resulted in lower application quality, that is, higher coefficients of distribution rate variations, using the same fertilizer spreader configuration and spread width. The proposed hypothesis was not rejected.

Downloads

Download data is not yet available.

Article Details

How to Cite
Tourn, S. N., Merani, V., Mur, M., Platz, P., Guillino, F., Vázquez, J. M., … Balbuena, R. (2021). Effects of urea transportation systems on its physical and field application quality. Ciencias Agronómicas, (38), e015. https://doi.org/10.35305/agro38.e015
Section
Artículos originales

References

Andrade, F. H. (2020) Los desafíos de la agricultura global. 1ra Ed. Am. Ciudad de Buenos Aires: INTA Ediciones.

ANGELOVIČ, M. (2013) Effect of Manipulation Technique on the Grains Quality in Animal Science and Biotechnologies, 46(2), 431-436.

BOTTA, G. y DAGOSTINO, C. (2001) Máquinas para la fertilización y abonos. ISBN 987-523-125-4. Ed Forrajes & Agrobussines Journal. 104p.

Bragachini, M.; Von Martini, A. y Méndez, A. (2003) Influencia de la cosecha sobre la calidad de los granos. Disponible en: https://www.deere.com.ar/common/docs/services_and_support/tips/combines/cs048_calidadgranoscosecha_anexo.pdf

CARCIOCHI, W. y TOURN, S. (2017) Características físicas de los fertilizantes y calibración de fertilizadoras. Archivo agronómico #16. IPNI Canadá. Disponible en http://lacs.ipni.net/ipniweb/region/lacs.nsf/0/232593f37bc0e8820325826f005590f2/$file/aa16.pdf

Cruzate, G. A. y Casas, R. R. (2012). Extracción y balance de nutrientes en los suelos agrícolas de la Argentina, Informaciones Agronómicas de Hispanoamérica, IAH 6, 7-14.

Díaz de Astarloa, D. A. y Pengue, W. A.. (2018). Nutrients Metabolism of Agricultural Production in Argentina: NPK Input and Output Flows from 1961 to 2015, Ecological Economics, 147(January), 74-83. doi: https://doi.org/10.1016/j.ecolecon.2018.01.001

Dvorkin, J. y Gutierrez, M. A. (2001). Grain sorting, porosity, and elasticity, Geophysics, 5(1), 1-19.

Fertilizar, asociación civil (2020) Evolución Mercado de Fertilizantes Argentino 2020. Disponible en: https://fertilizar.org.ar/wp-content/uploads/2021/03/Evolución-Mercado2020.pdf.

Fulton, J. P. y Port, K. (2016) Physical Properties of Granular Fertilizers and Impact on Spreading, Ohio State University Extension, p. 9. Disponible en: https://ohioline.osu.edu/factsheet/fabe-5501.

GOWARIKER, V.; KRISHNAMURTHY, V.; GOWARIKER, S.; DHANORKAR, M. y PARANJAPE, K. (2009). The Fertelizer Encyclopedia (1st ed.) Wiley. Retrived from https://www.periego.com/bock/2783577/the-fertilzer-encyclopedia-pdf (Original work published 2009).

Hofstee, J. W. (1995) Handling and spreading of fertilizers: Part 4, the reciprocating spout type fertilizer spreader, Journal of Agricultural Engineering Research, 9-24. doi: https://doi.org/10.1006/jaer.1995.1059

ISO 5690/1 (1985) International Standard ISO 5690/1, International organization for standardization, 1(I), 13p.

Jones, C. A. (1983) Effect of Soil Texture on Critical Bulk Densities for Root Growth1, Soil Science Society of America Journal, 47(6), 1208p. doi: https://doi.org/10.2136/sssaj1983.03615995004700060029x

Koltermann, C. E. y Gorelick, S. M. (1995). Derived Petrophysical Models for Porosity, Water Resources, 31(12), 3283-3297.

Márquez, L. (2011). La tecnología de las abonadoras de proyección frente a la dosificación variable de los abonos minerales. Part II, Agrotécnica, abril, 36-44.

Martinez Peck, R. (2007). Regulación de fertilizadoras a platillos, Fertilizar 2007. 7(3), 18-22.

MELGAR, R. y CAMOZZI, M.E. Guía 2002. Fertilizantes, enmiendas y productos nutricionales. INTA. 259 p.

GRAFTON, M. C.; IZQUIERDO, D. A.; YULE, I. J.; WILLIS, L. A. y MANNING, M. J. (2015). The effect of field conditions on in-field spread patterns from twin disk spreaders. In 2015 ASABE annual international meeting. (1p). American Society of Agricultural and Biological Engineers.

MORSY, H. A.; PALIWAL, J.; ABOUELMAGD, A.; HEDIA, H., y ISMAIL, Z. (2012). Some Properties of Fertilizers in Relation to Particle Motion In The Hopper and on the Distributor disc.

Piñeyro, C. J. (2017). Daños en el grano de soja generados por el proceso de cosecha y postcosecha. Universidad Nacional de La Plata.

REUSSI CALVO, N.I.; SAINZ ROZAS, H.; WYNGAARD, N. y ECHEVERRÍA, H. (2018).¿Cuánto ganamos con un diagnóstico correcto de nitrógeno?. Visión rural N 115 INTA. 28-30.

DI RIENZO, J. A.; CASANOVES, F.; BALZARINI, M. G.; GONZALEZ, L.; TABLADA, M., y ROBLEDO, C. W. (2008). InfoStat (No. 2008). Grupo InfoStat. FCA, Universidad Nacional De Cordoba. https://www.infostat.com.ar/.

RUIZ DIAZ, D.; HANSEL, F.; PRESTON, P. y STAMMER, A. (2019). Manejo de la fertilización de cultivos en el medio oeste de EE.UU. Simposio de fertilidad 2019. Rosario, Santa Fe. Argentina.

SAINZ ROZAS, H.; EYHERABIDE, M.; LARREA, G.; MARTÍNEZ CUESTA, N.; ANGELINI, H.; REUSSI CALVO, N. y WYNGAARD, N. (2020). Relevamiento y determinación de propiedades químicas en suelos de aptitud agrícola de la región pampeana. Área de investigación y desarrollo tecnológico, 8(9), 12.

Santos, J. (2019) Uniformidad de Distribución de Urea por proyección con distintas fertilizadoras y su efecto sobre la producción de grano de maíz. Universidad Nacional de Mar del Plata. Balcarce. Argentina.

SENASA (1995) Resolución 273/1995. Fertilizantes y mezclas granuladas parámetros de calidad física. Fecha de sanción 18-12-1995. https://www.argentina.gob.ar/normativa/nacional/resoluci%c3%b3n-273-1995-31470

TORRES DUGGAN, M. (2007) Calidad de fertilizantes: ¿Cuáles son las principales propiedades y atributos que determinan su valor agronómico? Presentado en el simposio de “Fertilidad 2007”. IPNI Cono Sur / Fertilizar ac. Rosario, 10 y 11 de mayo del 2007. 12p.

TOURN S.N.; SANTOS J.I.; TRUEBA M.; LASAGA R., MARTINEZ D. y CARCIOCHI W. (2019). Regulación de fertilizadoras: con la dosis no alcanza. Facultad de ciencias agrarias de Balcarce (UNMDP) Simposio Fertilidad 2019. Fertilizar. 314. 67-72.

U.N.I.D.O., (United Nations Industrial Development Organization) y I.F.D.C., (International Fertilizer Development Center) (1979) Fertilizer manual.pdf. Vienna, Austria; Alabama, Usa.

Westman, E. y Hugill, H. R. (1999) The Packing of Particle, Defense, (1), 767-779.

Most read articles by the same author(s)

Similar Articles

1 2 3 > >> 

You may also start an advanced similarity search for this article.